Table des Matières
Publicité
Janome 2212 Instruction Manual
1
3
1
2
2
3
www.toews.com
5
4
6
Balancing Needle Thread Tension
z z z z z
Correct tension
The thread tension is adjusted depending on the
sewing materials, layers of fabric and sewing method.
* The ideal straight stitch has threads locked between two
layers of fabric, as illustrated (magnified to show detail).
* For an ideal zigzag stitch, the bobbin thread does not
show on the right side (top side) of the fabric, and the needle
thread shows slightly on the wrong side (bottom side) of
the fabric.
q
Needle thread (Top thread)
w
Bobbin thread (Bottom thread)
e
Right side (Top side) of fabric
r
Wrong side (Bottom side) of fabric
t
Thread tension dial
y
Setting mark
x x x x x
Needle thread tension is too tight
When the bobbin thread (bottom thread) appears on
the right side (top side) of the fabric, loosen the needle
thread tension by moving the dial to a lower number.
Needle thread tension is too loose
c c c c c
When the needle thread (top thread) ppears on the
wrong side (bottom side) of the fabric, tighten the needle
thread tension by moving the dial to a higher number.
Adjusting Bobbin Thread Tension
For general sewing, the bobbin thread tension does not need
to be adjusted. However, you can adjust the bobbin thread
tension for a specific sewing need.
Turn the adjusting screw to the right to tighten or, to the left
to loosen the tension.
22
2212 Owners Manual/ User Guide
Publicité
Table des Matières
