Service And Maintenance; Before Start-Up - FAR Farelek 112500 Mode D'emploi

SERVICE AND MAINTENANCE

In the case of prolonged non-utilisation
1
Operate the fan on its own for 3-4 hours in order to
dry completely the components of the internal unit.
•
Select the «COOL» or «HEAT» mode, and then the
highest programmed temperatures and start the fan.
2
Stop the air conditioner, and unplug it (important
when not used for a long time because accumulated when not used for a long time because accumulated when not used for a long time because accumulated when not used for a long time because accumulated
dust can cause a fire)
3
Remove the batteries from the remote control Remove the batteries from the remote control Remove the batteries from the remote control Remove the batteries from the remote control
112500-504-D
© FAR GROUP EUROPE 2004
64
Before startup
1
Clean the filters and replace them in their housing. Clean the filters and replace them in their housing. Clean the filters and replace them in their housing. Clean the filters and replace them in their housing.
Clean the internal unit using a soft cloth Clean the internal unit using a soft cloth Clean the internal unit using a soft cloth Clean the internal unit using a soft cloth
•
Do not use petrol, benzene, diluent, abrasive Do not use petrol, benzene, diluent, abrasive Do not use petrol, benzene, diluent, abrasive Do not use petrol, benzene, diluent, abrasive
powder, detergent, insecticide etc. to clean the unit powder, detergent, insecticide etc. to clean the unit powder, detergent, insecticide etc. to clean the unit powder, detergent, insecticide etc. to clean the unit
because you could damage it. because you could damage it. because you could damage it. because you could damage it.
2 2 2
Do not cover or obstruct the inputs and outputs of Do not cover or obstruct the inputs and outputs of
the internal and external units. the internal and external units.
3
The earthed cable must be securely fixed. Insert the
batteries and plug in.
17/05/04, 17:04
GB