FAR Farelek 112500 Mode D'emploi page 69

SPECIFICATIONS
NOTES
• The indicated noise value results from laboratory tests before the conditioner leaves The indicated noise value results from laboratory tests before the conditioner leaves The indicated noise value results from laboratory tests before the conditioner leaves The indicated noise value results from laboratory tests before the conditioner leaves
the factory.
• The nominal cooling and heating capacities have been tested under the conditions The nominal cooling and heating capacities have been tested under the conditions The nominal cooling and heating capacities have been tested under the conditions The nominal cooling and heating capacities have been tested under the conditions
described below :
Cooling internal
Heating internal
• The data above are subject to modifications without prior warning. The data on the The data above are subject to modifications without prior warning. The data on the The data above are subject to modifications without prior warning. The data on the The data above are subject to modifications without prior warning. The data on the
data sheet of your air conditioner are precise and updated. data sheet of your air conditioner are precise and updated. data sheet of your air conditioner are precise and updated. data sheet of your air conditioner are precise and updated.
• Range of operating temperatures :
Internal DB/WB ( °C)
External DB/WB ( °C)
• If the operating voltage of the air conditioner exceeds 230V 10%, it will malfunction. If the operating voltage of the air conditioner exceeds 230V 10%, it will malfunction. If the operating voltage of the air conditioner exceeds 230V 10%, it will malfunction. If the operating voltage of the air conditioner exceeds 230V 10%, it will malfunction.
• Each unit (internal/external) is provided with a wiring diagram of the conditioner. Each unit (internal/external) is provided with a wiring diagram of the conditioner. Each unit (internal/external) is provided with a wiring diagram of the conditioner. Each unit (internal/external) is provided with a wiring diagram of the conditioner.
• If the supply cable or connection cable is damaged, it must be replaced by the If the supply cable or connection cable is damaged, it must be replaced by the If the supply cable or connection cable is damaged, it must be replaced by the If the supply cable or connection cable is damaged, it must be replaced by the
manufacturer, its maintenance agent or a qualified technician in order to avoid any manufacturer, its maintenance agent or a qualified technician in order to avoid any manufacturer, its maintenance agent or a qualified technician in order to avoid any manufacturer, its maintenance agent or a qualified technician in order to avoid any
danger.
112500-504-D
27°C(DB)
20°C(DB)
Cooling maxi- Cooling minimum Cooling minimum Cooling minimum Cooling minimum
mum
32/23
43/26
© FAR GROUP EUROPE 2004
69
19°C(WB) external external
15°C(WB) 15°C(WB) external external
Heating maximum Heating maximum
21/15 21/15 27/--
21/15 21/15 24/18
17/05/04, 17:04
35°C(DB) 35°C(DB) 35°C(DB) 35°C(DB) 24°C(WB)
7°C(DB) 7°C(DB) 6°C(WB)
Heating minimum
20/--
-5/-6
GB