Installation Diagrams - FAR Farelek 112500 Mode D'emploi

INSTALLATION DIAGRAMS

� � �
�
�
112500-504-D
�
�
���
�
� � � �
�
��
© FAR GROUP EUROPE 2004
43
�
� � � �
� � � �
�
17/05/04, 17:03
Check the positioning of the Check the positioning of the
installation via the marking of installation via the marking of installation via the marking of installation via the marking of
the mounting plate of the inter- the mounting plate of the inter- the mounting plate of the inter- the mounting plate of the inter-
nal unit. nal unit. nal unit. nal unit.
Note: do not place the Note: do not place the
emptying hose in a high emptying hose in a high
position position
The connection pipe can be
installed on the back, right,
lower or back left face.
Back Front
right
Left
Bottom
Back left
Cover the connection
pipe with thermal insu-
lation.
Thickness of the insu-
lation: 8mm
Place a wooden wedge of
thickness greater than 20 mm
between the wall and the con-
nection pipe, or cover the con-
nection pipe with 7 or 8 layers
of adhesive, for installation of
the connection pipe on a wall
with a wire mesh or thin metal
sheeting.
GB