Technical Specifications - ResMed AirFit N10 Guide D'utilisation

Technical specifications

Pressure-flow
curve
Dead space
information
Therapy
pressure
Resistance
Environmental
conditions
Gross
dimensions
Mask setting
options
Notes:

The mask system does not contain BPA, PVC, DEHP or phthalates.

This product is not made with natural rubber latex.

The manufacturer reserves the right to change these specifications
without notice.
The mask contains passive venting to protect against rebreathing.
As a result of manufacturing variations, the vent flow rate may
vary.
Physical dead space is the empty volume of the mask to the end of
the swivel. Using the wide cushions it is 104 mL.
4 to 30 cm H O
2
Drop in pressure measured (nominal)
at 50 L/min: 0.4 cm H
at 100 L/min: 1.2 cm H
Operating temperature: +41°F to +104°F (+5°C to +40°C)
Operating humidity: 15% to 95% non-condensing
Storage and transport temperature: -4°F to +140°F (-20°C to +60°C)
Storage and transport humidity: up to 95% non-condensing
19.0" (H) x 6.10" (W) x 4.33" (D)
(483 mm (H) x 155 mm (W) x 110 mm (D))
Mask fully assembled with short tube assembly (no headgear)
For AirSense, AirCurve and S9: Select 'Pillows'
For other devices: Select 'SWIFT' (if available), otherwise select
'MIRAGE' as the mask option.
O
2
O
2
Pressure Flow
(cm H O) (L/min)
2
4 20
8 29
11 35
12 37
16 43
17 44
20 49
22.5 53
24 54
30 61
English 7