1.5
unpacking appliance
Carefully remove the appliance from the box.
The appliance comes with medium density fi breboard (MDF board) installed on the sides.
1. Remove screws on each side (Fig. 1-1), and then discard both MDF boards.
2. Use 4 new screws (supplied) on each side to cover MDF board screw holes (Fig. 1-2).
1.6
rating plate information
CERTIFIED UNDER CANADIAN AND AMERICAN NATIONAL STANDARD: CSA 22.2 NO. 46 AND UL 2021 / HOMOLOGUÉ SELON LES
NORMES NATIONALES CANADIENNES ET AMÉRICAINES:CSA 22.2 NO. 46 ET UL 2021
ELECTRIC FIREPLACE. SUITABLE FOR BEDROOM AND
BED-SITTING ROOM INSTALLATION. SUITABLE FOR MOBILE
HOME INSTALLATION.
DESIGNED IN NORTH AMERICA BY WOLF STEEL LTD.
N NORTH AMERICA
N NORTH AMERICA BY W
WOLF STEEL LTD.
24 NAPOLEON ROAD,
BARRIE, ON, L4M 0G8 CANADA
This illustration is for reference only. Refer to the rating plate on the appliance for accurate information.
note:
The rating plate must remain with the appliance at all times. It must not be removed.
top view
Fig. 1-1
MASTER CONTRACT: 161746
TRACT: 161746
ACT: 161746
NEFBD50HE
NEFBD50HE
BD50H
MODEL
MODEL
MODEL
VOLTAGE: 120/240 V
VOLTAGE: 120/240 V
VOLTAGE:
120/240 V
FREQUENCY: 60Hz
FREQUENCY: 60Hz
FREQUENCY:
60Hz
POWER: 1500W/3000W
POWER:
POWER: 1500W/3000W
1500W/3000W
DATE CODE: XXXXX
DATE CODE:
CODE:
MADE IN CHINA
SERIAL NUMBER/NO. DE SERIE:
general information
bottom view
Topaz Glass
Caution Label
W385-2236
FOYER À ÉLECTRIQUE. HOMOLOGUÉ POUR INSTALLATION
DANS UNE CHAMBRE À COUCHER, UNE SALLE DE BAIN ET
BRE À COUCHER, UNE
UN STUDIO. APPROPRIÉ POUR INSTALLATION DANS UNE
TUDIO. APPROPRIÉ POUR INSTALLA
APPROPRIÉ POUR INSTA
MAISON MOBILE.
MAISON MOBILE.
MAISON MOBILE.
CONTRACT-CADRE: 161746
CONTRACT-CADRE: 161746
CONTRACT-CADRE: 16
CEFBD50HE
CEFBD
CEFBD50HE
TENSION: 120/240 V
TENSION:
TENSION 120/240 V V
FRÉQUENCE: 60Hz
FRÉQUEN
FRÉQUENCE:
60Hz
PUISSANCE: 1500W/3000W
PUISSAN
PUISSA
CODE DE DATE:
DÉSIGNÉ AMÉRIQUE DU NORD PAR WOLF STEEL LTD.
FABRIQUE EN CHINE
Acrylic
Crystals
B x 8
Fig. 1-2
UÉ PO
É PO
OUCHER, UNE
NEFBD50HE
W385-2408
W415-2107 / B / 10.31.19
EN
7