Steelcase Ology Bench Mode D'emploi page 13

®
NOTE: Steps 16-20 not required for
fixed height legs.
X
For Active Touch Only:
Tap the Switch. Each time it is
16
pressed, it will toggle between
22.6" and 27.3", the 2 different
starting heights.
22.6" = Extended Legs
22.6"
27.3" = Basic Legs
or
27.3"
Once the desired height is
achieved, let go of the switch for
more than 3 seconds and the
setting will stay permanently.
15
X
Press down to initialize the
desk, holding for 3 seconds.
After initialization, the legs will
now adjust vertically.
Extended Leg
Basic Leg
19
NOTE: Extend to full height
to check cable clearances.
Extended Leg: 22.6" to 48.7"
Basic Leg: 27.3" to 46.4"
2X
18
20
Page 13 of 33
P/N 1158370001
Doc # 95455 Rev K