Changing A Top Vent To A Rear Vent - Napoleon Knightsbridge GDS60-1N Manuel D'installation

3.2

changing a top vent to a rear vent

In order to convert the venting confi guration from a top exit to a rear exit, remove components as illustrated. When
reinstalling in the alternate position: Check gaskets for tears, replace if necessary to ensure a proper seal.
Outer Top
Top Heat
Shield
7" (178mm)
Collar
7" (178mm)
Gasket
4" (102mm)
Collar
4" (102mm)
Gasket
installation preparation - model GDS60-1
4" (102mm)
Gasket
Optional trivet required when converting
to rear exit.
7" (178mm) Gasket
4" (102mm)
Cover Plate
EN
7" (178mm)
Cover Plate
23
W415-1328 / C / 12.06.18