Audio Setup
To set Turret as your default audio recording and playback device, follow the directions below based
on your computer's operating system.
Windows:
1.
Use the included USB cable to connect the Turret to your computer.
2.
In the Taskbar, locate the Volume Control "speaker" icon. Right-click the speaker and select
Playback Devices.
Alternatively, go to Start Menu > Control Panel (or Settings > Control Panel in Classic View) >
Hardware and Sound > Sound.
3.
In the Windows Sound control panel select the Playback tab and select Marantz Turret Audio
as the default device.
4.
Click the Recording tab and select Marantz Turret Audio as the default device.
5.
Click Properties in the lower right-hand corner.
6.
In the new window, click the Advanced tab and select 2-channel, 24-bit, 48000 Hz (Studio
Quality) as the default format.
Note: Although Turret's audio interface supports up to 24-bit audio, the microphone's output is
16-bit only.
7.
Uncheck both boxes under Exclusive Mode.
8.
Click OK to close the Properties window.
9.
Click OK to close the Sound control panel.
Mac OS X:
1.
Use the included USB cable to connect the Turret to your computer.
2.
Go to Applications > Utilities > Audio MIDI Setup.
3.
In the Audio Devices window, select Marantz Turret Audio in the left column.
4.
Right-click Marantz Turret Audio, and select Use this device for sound input.
5.
Right-click Marantz Turret Audio, and select Use this device for sound output.
6.
Quit Audio MIDI Setup.
Video Setup
To set Turret as a video capture device, follow the directions below:
1.
Use the included USB cable to connect the Turret to your computer.
2.
Press the Camera On/Off button to turn the camera on.
3.
Open your software. If you have no other video capture devices connected, Turret should
automatically be selected in your software's video settings. Otherwise, select Turret in the list of
video capture devices.
4