Marantz professional Turret Guide D'utilisation page 3

Setup
Connection
Items not listed under
1. Use the included power adapter to connect the Power Input to a power outlet.
2. Use the included USB cable to connect the USB Port labeled To PC to your computer.
3. Optional: Connect USB flash drives to USB Ports 1 and/or 2. You can to use your computer to
access these drives.
4. Optional: Use a 1/8" (3.5 mm) stereo audio cable to connect this output to the input of an
external mixer, speaker, etc.
5. Optional: Attach the desired lighting filter to the LED Ring Light. Use the Brightness knob to
adjust the brightness of the light ring around it.
Note: Remove the plastic film from the lighting filter before use.
6. Connect 1/8" (3.5 mm) stereo headphones to the Headphone Output. Use the Headphone
Volume knob to adjust the volume.
7. Use the Mix knob to adjust the balance between the microphone signal (Mic) and the signal
from your computer (PC) that you hear in the headphones.
8. Open your video or audio recording software, and select Marantz Turret as your computer's
default playback and recording devices.
9. You're now ready to start recording.
Introduction Box Contents are sold separately.
3