Connecting Audio Devices; Connecting Audio Devices Via Aux In - Medion Dolby Atmos LIFE S61388 Notice D'utilisation

 Hold the wall mounts in place at the desired mounting point and mark the four
drill holes required.
 The distance between the two wall mounts is 525 mm. The distance between
the two screws on each side is 35 mm.
 Drill the holes. To do so, use an appropriate drill bit for the respective surface
(dia. 6 mm, depending on the wall type).
 Push the wall plugs (M6 x 26) into the drill holes.
 Screw four suitable screws (e.g. raised countersunk head screws, 4 mm x 30 mm)
into the drill holes. Leave the screw heads protruding from the wall by approx. 2
mm.
 Place the wider part of the wall mounts on the screw heads, then gently press
the soundbar downwards until the screws lock into place on the wall mounts.

7. Connecting audio devices

You can connect a wide range of different audio output devices to the soundbar,
such as a television, MP3 or CD player, receiver, computer etc.
 Switch off all the devices before connecting them to each other.
Also comply with the information in the user manual for the device you
want to connect to the soundbar.

7.1. Connecting audio devices via AUX IN

7.1.1. Audio cable with 2 x 3.5 mm diameter jacks
You will need an audio cable with 2 x 3.5 mm diameter jacks (not supplied) to
connect an output device to the soundbar using the headphone output socket on
the output device.
 Set the output device to a medium volume level and then switch it off.
 Insert the jack plug into the soundbar's AUX IN socket.
 Insert the other jack plug into the headphone output socket on the output
device.
7.1.2. Audio cable with cinch plugs
You will need an audio cable with cinch plugs, 1 x 3.5 mm jack -> 2 x cinch (not
supplied) to connect an audio device to the soundbar using the cinch outputs on
the audio device.
 Set the output device to a medium volume level and then switch it off.
 Insert the jack plug into the soundbar's AUX IN socket.
 Insert the red and white cinch plugs at the other end of the cable into the
corresponding colour-coded output sockets on the audio device.
56