Introduction And Safety; Safety Terminology And Symbols; Spare Parts; Ec Declaration Of Conformity - Lowara Q-Smart Manuel D'installation, D'exploitation Et De Maintenance

en - Original instructions
1

Introduction and safety

1.1 Introduction
Purpose of this manual
The purpose of this manual is to provide information
on:

Installation

Operation

Maintenance
CAUTION:
Read this manual carefully before
installing and using the product. Im-
proper use of the product can cause
personal injury and damage to proper-
ty, and may void the warranty.
NOTICE:
Save this manual for future reference, and keep it
near the unit at all times.

1.2 Safety terminology and symbols

Hazard levels
Symbol
DANGER
WARNING
CAUTION
NOTICE:
Hazard categories
Hazard categories can correspond to either hazard
levels or to specific symbols that replace the ordinary
hazard level symbols.
Electrical hazards are indicated by the following spe-
cific symbols:
ELECTRICAL HAZARD:
32
Indication
A hazardous situa-
tion which, if not
avoided, will result
in death or serious
injury
A hazardous situa-
tion which, if not
avoided, could
result in death or
serious injury
A hazardous situa-
tion which, if not
avoided, could
result in minor or
moderate injury
• A potential situa-
tion which, if not
avoided, could
result in unde-
sirable condi-
tions
• A practice not
related to per-
sonal injury
1.3 Inexperienced users
WARNING:
This product is intended to be operated
by qualified personnel only.
Be aware of the following precautions:

This product is not to be used by anyone with
physical or mental disabilities, or anyone without
the relevant experience and knowledge, unless
they have received instructions on using the
equipment and on the associated risks or are
supervised by a responsible person.

Children must be supervised to ensure that they
do not play on or around the product.
1.4 Warranty
For information about the warranty, see the sales
contract.

1.5 Spare parts

WARNING:
Only use original spare parts to replace
any worn or faulty components. The use
of unsuitable spare parts may cause
malfunctions, damage, and injuries, as
well as void the warranty.
For more information about spare parts for the prod-
uct, refer to the Sales and Service department.

1.6 EC Declaration of Conformity

Xylem Service Italia S.r.l., with headquarters in Via
Vittorio Lombardi 14 - 36075 Montecchio Maggiore
VI - Italy, hereby declares that the product
Q-SMART control panel for electric pumps (see label
on first page)
fulfills the relevant provisions of the following Euro-
pean directives
• Low Voltage 2006/95/EC (year of first mark: 2016)
• Electromagnetic compatibility 2004/108/EC
and the following harmonised technical standards
• EN 60730-1:2011, EN 60204-1:2006+A1:2009,
EN 61439-1:2011, EN 61439-2:2011
• EN 61000-6-1:2007, EN 61000-6-3:2007+A1:2011
Montecchio Maggiore,
18.02.2016
Amedeo Valente
(Director of Engineering
and R&D)
rev.00
Lowara is a trademark of Xylem Inc. or one of its
subsidiaries.