ShelterLogic 70401 Mode D'emploi page 5

3. ASSeMBle leGS & AttAcH to rooF FrAMe
A. Assemble corner leg bends to vertical poles for corner legs, then to roof frame.
B. Attach legs with bolts on one side of roof frame, let the other side of roof frame rest on the ground.
C. Attach remaining legs with bolts to opposite side of roof frame.
NOTE: No bolts are required for these connections.
Corner Legs
4. ASSeMBle coVer rAIlS
A. Place the cover rail
B. Slide the cover rails so they are 8 inches up from the ground and hand tighten bolts on clamps.
End Rib Cross Rail Clamps
800374
800374
800361
800361
at each leg and secure it at each leg with a cover clamp as shown below.
(800178, 800179)
13202
10115
800178
01011
01010
800361
Front
Page 5
reAr
800179
800178
05_70401-70402-70405_0I