Pioneer AVH-P5900DVD Manuel D'installation page 5

Interface cable (e.g., CD-I200)
Gray
(sold separately)
Yellow/black
If you use equipment with Mute function, wire this lead to
the Audio Mute lead on that piece of equipment. If not,
keep the Audio Mute lead free of any connections.
Connection method
1. Clamp the lead.
Note:
• The position of the parking brake switch depends on the vehicle model. For details,
consult the vehicle Owner's Manual or dealer.
Light green
Used to detect the ON/OFF status of the parking brake. This
lead must be connected to the power supply side of the parking
brake switch.
Blue/white
Connect to system control terminal of the power
amp (max. 300 mA 12 V DC).
Blue/white (6*)
The pin position of the ISO
connector will differ depending
on the type of vehicle. Connect
6* and 7* when Pin 5 is an
antenna control type. In other
types of vehicles, never connect
6* and 7*.
20 cm
Blue/white (7*)
Connect to auto-antenna relay control terminal
(max. 300 mA 12 V DC).
Notes:
• Change the initial setting of this unit (refer to the Operation
Manual). The subwoofer output of this unit is monaural.
• When using a subwoofer of 70 W (2 Ω) , be sure to connect with
Violet and Violet/black leads of this unit. Do not connect
anything to Green and Green/black leads.
Dock connector port
Dock connector
2 m
AUX jack (3.5 ø)
Use a mini plug cable to
connect with auxiliary
equipment.
2. Clamp firmly with
Power supply side
Ground side
iPod with Dock
Connector
needle-nosed pliers.
Parking brake
switch
4