Bodum BISTRO 11901 Mode D'emploi page 11

HOT 1. Connect the power cord plug to a suitable
FROTHING power outlet.
2. Open the lid and place the frothing disk
(2) onto the rotating shaft.
3. Fill the milk container in cold milk. The
milk level must be between the mark "MAX
4. Put the lid on firmly by pushing it down
slightly.
5. Place the milk container on the machine
base.
6. Press the button once, the red indicator
light will flash three times. The disk will start
to rotate. The unit starts to heat up and
enters the Hot Frothing program.
7. The temperature of milk will reach
approx. 70°C and the product will stop
operating when ready.
8. Remove the milk container from the
machine base and open the lid.
9. Then pour the milk from the milk
container.
HEATING 1. Connect the power plug to a suitable
MILK power outlet.
2. Open the lid place the heating disk (10)
onto the rotating shaft.
3. Fill in milk. The milk level must be
between the mark "MAX" and "MIN".
" and "MIN".
12
EN