Bodum BISTRO 11901 Mode D'emploi page 10

cleaned or removed after use), the indicator
of the main unit will flash once every
second, continuously.
2. When the cup is placed on the main unit,
the indicator light turns off.
3. Press the button once, the red indicator
light will flash three times. The disk will start
to rotate. The unit starts to heat up, enters
the Hot Frothing program or the Heating
program (depending on the disk). The red
indicator light will remain on during work.
4. Press the button twice, the white
indicator light will flash three times. The disk
will start to rotate. The unit starts to heat up,
enters the Hot Chocolate program, and the
white indicator light will remain on during
work.
5. Press the button three times in
succession, the blue indicator light will flash
three times. The disk will start to rotate. The
unit will enter the Cold Frothing program,
without heating up, and the blue indicator
light will remain on during work.
NOTE: Switching from one program to
another must be completed within three
seconds.
CAUTION: If you want to prepare more
milk froth, let the milk frother cool down for
a few minutes before further use. As long
as the milk frother is hot, the thermostat
prevents it from being used. You can rinse
the inside of the milk frother with cold water
to accelerate the cooling process.
11