B42 Log Placement - Continental Fireplaces CB35NT Manuel D'installation

D
E. Place the right crossover log (W135-0547)
onto the pin located in the right side of the
rear log, allow it to rest in the notch of the
right log.
6.3 CB42 LOG PLACEMENT
A. Place the rear log (W135-0574) fi rmly onto
the two studs located at the rear of the
support tray. Ensure the log sits fl at and
does not cover the pilot opening. Place two
pins in holes located on the top of the rear
log.
B
Place the right log (W135-0545) onto the two
C.
studs located on the right side of the log
support.
A
E
C
B
PINS
A
PIN
A
C
F. Tear the ember material into small thin pieces
and spread evenly on top of the burner.
Ember material will only glow when exposed
to direct fl ame.
G. Reinstall the door and safety screen.
PIN
B
B. Place the left log (W135-0544) onto the two
studs located on the left side of the log support.
D
B
D. Place the left crossover log (W135-0546) onto
the pin located in the left side of the rear log,
allow it to rest in the notch of the left log.
A
A
C
W415-1400 / 10.01.14
37
EN