Maintenance; Warranty - Storch Digi Dist Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38

Maintenance

The Digi Dist unit is a low-maintenance device. However, in order to maintain its perfor-
mance the following simple guidelines must be observed.
1. Always handle the device with care. It is an optical instrument like a camera and
should be treated as such.
2. Avoid exposing the device to shock, continuous vibration or extreme hot and cold
temperatures.
3. Always store the device indoors. When it is not in use ALWAYS store the device in
its protective case.
4. Always keep the device away from dust and moisture. Only use a clean, soft cloth
when cleaning. If necessary, moisten the cloth lightly with pure alcohol or some
water.
5. Never touch the lens with your fingers.
6. Check the batteries on a regular basis to prevent premature aging. If the device is
not going to be used for a prolonged period, ALWAYS remove the batteries.
7. Replace the batteries when the empty battery symbol is displayed on the LCD
screen.
8. Do not disassemble the device under any circumstances; doing so can expose the
user to hazardous radiation.
9. Never attempt to modify any part of the laser lens.

Warranty

Warranty conditions:
A warranty period of 12 months from the date of purchase/date of invoice applies to our
tools for commercial customers. If we have granted an extended warranty period, this
said period will be noted separately in the operating manual for the tool in question.
Claims:
If you wish to claim under our warranty or guarantee, please return the entire tool and
your invoice to us, postage paid, or send it to one of our authorised service centres.
Your rights under our warranty or guarantee:
Claims for repairs only relate to materials or manufacturing defects and are subject to
the intended use of the tool. Wear parts are not covered by such claims. Installation of
third party components, improper use and storage, as well as obvious failure to observe
the operating instructions will void your warranty.
Repairs:
All repairs must be conducted on our premises or by an authorised STORCH service cen-
tre.
90

Publicité

Table des Matières
loading

Table des Matières