Charging - Doro PhoneEasy 410gsm Mode D'emploi

Charging

Warning!
Only use batteries, charger and accessories that have been
approved for use with this particular model . Connecting other
accessories may be dangerous and may invalidate the phone's
type approval and guarantee .
When the battery is running low,
signal is heard. To charge the battery, connect the mains adapter
to a wall socket and to the charging socket y .
is displayed briefly when the charger is connected to the
phone, and
The battery charge indicator will be animated while charging. It
takes approximately 3 hours to fully charge the battery.
is displayed on the screen when charging is completed. If the
phone is turned off when the charger is connected to the phone
only the battery charge status indicator will be shown in the
display.
Note!
To save power the LCD backlight goes off after a short while
but the phone is still charging. Press any key to illuminate the
display.
Full battery capacity will not be reached until the battery has
been charged 3–4 times.
Batteries degrade over time, which means that call time and
standby time will normally decrease with regular use.
Save energy
When you have fully charged the battery and disconnected the
charger from the device, unplug the charger from the wall outlet.
Phone indicators
When flash you have a new message or a missed call.
5
When ] flash the battery is running low.
English
when it is disconnected.
is displayed and a warning
4