Call Setup - Doro PhoneEasy 410gsm Mode D'emploi

Call setup

1 . Press
Menu
2 . Select
Call setup
Caller ID
Controls display of your phone number on the recipients phone.
Select an option and press
Set by network
Hide ID
Send ID
Call waiting
Select an option and press
Activate
Deactivate
Query status
Call divert
Set up which calls should be diverted.
Select a condition and press
Deactivate or
Div . voice calls
Div . unreach
Div . no reply
Divert if busy
Cancel diverts
, scroll to
and press
OK
Use default setting by the network
Never show your number
Always show your number
OK
Enables the function
Disables the function
Displays if the service is active or not
Query status
Diverts all voice calls
Diverts incoming calls if the phone is turned off or
out of range
Diverts incoming calls if unanswered
Diverts incoming calls if the line is busy
Do not divert calls
English
and press
OK for the following settings:
.
. See also Operation - Call
OK , then select
(see Call waiting
32
OK .
Activate ,
above) for each.
waiting.