Irc Operation (Cont.) - Chauvet Freedom Par Quad-5 Mode D'emploi

IRC Operation
(cont.)
Page 24 of 88
Manual Color Control
To manually choose a specific color:
1. Press any number from 0–9 on the IRC to choose your color.
Button Color
0 White
1 Red
2 Orange
3 Yellow
4 Green
5 Cyan
6 Blue
7 Violet/Purple
8 Pink
9 Amber
To manually control the RGB percentage:
1. Press <MANUAL> on the IRC.
2. Press <R> (red), <G> (green), or <B> (blue) to choose your color.
3. Press 0–100 to select a percent value.
4. Press <%> to set the percent change.
Miscellaneous Operation
To adjust the strobe rate of the program:
1. Press <STROBE> on the IRC.
2. Press <+> or <–> to increase or decrease the strobe rate.
3. Press <STROBE> again to turn off the strobe.
To change the switching effect of the program:
1. Press <FADE/SNAP> on the IRC.
Fade will slowly switch the effect. Snap will rapidly switch the effect.
To black out the lights:
1. Press <BLACK OUT> on the IRC.
This will turn off all the lights until the button is pressed again.
NOTE: The IRC will not respond to any inputs when Black Out is activated. If the remote
does not respond when a button is pressed, try pressing <BLACK OUT>. You may have
inadvertently activated Black Out.
Freedom™ Par Quad-5 and Strip Mini Quad-5 User Manual Rev. 5