Atag Descale Notice D'installation page 14

SOFTENING CAPACITY
SET "3.00"
"NORMAL"
SET
"RESERVE CALCULATOR"
SET
14
Set up softener capacity.
KG
If hardness unit is ppm then capacity unit is kg
If no unit is set for "hardness", default unit is m
Push on
Set up brine tank refill (only be available if configured as
FILL
a 25mm Pre-Fill Up-Flow brining softener)
You can select between "NORMAL" and "PROPORTIONAL".
Proportional brining will only be available if configured as a
25mm Pre-Fill Up-Flow brining softener.
Proportional brining corresponds with ratio of used
capacity on total capacity multiplied by refill for a complete
regeneration of resin bed.
Push on
Set up reserve type
AUTO
In "AUTO" position, capacity and reserve are automatically
calculated.
Note : "OFF" position corresponds with a timeclock use
with a regeneration frequency.
"M3", "NA", "NORES" position does not work with
"SOFTENING" mode.
Other option for special applications
Push on
to go to the next parameter
to go to the next parameter
to go to the next parameter
3