Atag Descale Notice D'installation page 11

b) Time of day setting – Customer level
TIME HOUR
SET "21":00
TIME MINUTES
SET 21:"00"
c) Hardness, calendar override, time of regeneration settings –
Level experienced user & installer
Note: After 5 minutes without action, the controller switches back to the operating mode
WATER HARDNESS
SET "340"
PPM
SERVICE HARDNESS
SET "40"
Push on "
"Hours" setting. Number flashes.
By pushing on
Push on
"Minutes" setting. Number flashes.
By pushing on
Push on
different parameters.
Push and hold for 3 secondes
Set up raw water hardness in the unit selected in item e)
(Normaly ppm as default parameter)
Push on
Set up residual hardness in softened water in the unit
selected in item e) (Normaly ppm as default parameter)
PPM
Push on
" button
or , adjust the hours
to go to the next parameter
or , adjust the minutes
to go to the normal mode. Scrolling of the
to go to the next parameter
to go to the next parameter
and
11