dirna Bergstrom bycool blue line FLAT Instructions De Montage page 25

FLAT
14
Connect sheathed wiring to the evaporative
boxes and water inlet pipe.
A- Connect the impulsion pipe to the pump which
comes from the evaporative unit.
B- Connect pump wiring and level.
15 Connect the battery wiring as indicated.
16
Position the pipes in such a way as they do not
need to be cut.
(*) Correct installation method, where the
drain pipe has a slope avoiding loops and
constrictions, enabling the water to drain into
the tank.
(**) Incorrect method, Do not do this.
(***) Do not cut surplus cable and Attach it
(wound), behind the water tank.
16
A
*
25
EN
®
14
B
15
16
**
***