Transport And Handling; Storage; Installation; Installation Conditions - FPZ SCL R20-MD MOR IE2 Instructions

11.3 TRANSPORT AND HANDLING

Manual handling and transport are permitted only in accordance with the current applicable
regulations.

11.4 STORAGE

•
Store the machine in a dry place, if possible keeping it in its packaging.
•
Do not remove the protection from the openings.

12 INSTALLATION

12.1 INSTALLATION CONDITIONS

Make sure the conditions of use as described in section 3 are complied with, then proceed with installation of the machine as specified
below.
•
The unit's support surface must be flat, sturdy, stable and as level as possible.
•
The unit must be installed on a structure that does not transmit vibrations. Do not install the unit on structures that can
transmit or amplify the noise.
FPZ-MI-R-MD-MOR-GOR-IE2-15-R03
=== m < 25 kg
36 / 119
m > 25 kg m > 25 kg