Prohibitions; Reasonably Foreseeable Improper Use - FPZ SCL R20-MD MOR IE2 Instructions

10.3 PROHIBITIONS

THE FOLLOWING IS PROHIBITED:
- Using the unit in installations for unforeseen use.
- The suction and conveying of aggressive, corrosive and/or harmful fluids.
- Using the unit in conditions different from the values given in the "SPECIFICATIONS" and RATING DATA.
- Using the unit without having considered the filter in suction and appraised the degree of filtration.
- Operation with inlet and/or outlet port closed (when not foreseen).
- Making conversions or changes to the unit, maintenance or repair work on own initiative or not envisaged in the manual. Maintenance
work can be carried out only in compliance with that described in this user manual, exclusively by qualified personnel.
IT IS COMPULSORY TO:
- Check and comply with the intended use of the machine.
- Check and comply with the conditions of use specified in this manual.
- Comply with the installation conditions specified in this manual.
- Carry out the preliminary checks as specified in the section "STARTUP".
- Carry out maintenance as specified in section 7.

10.4 REASONABLY FORESEEABLE IMPROPER USE

Non-compliance with the unit's intended use can cause serious accidents.
Failure to comply with the prohibitions/obligations can result in technical faults, damage to the system or accidents. Danger of serious
injury.
Listed below are some examples of improper use identified by risk analysis and based on practical experience, arranged according to
the conditions they can create.
IMPROPER USE
IMPROPER USE LINKED TO NORMAL OPERATION
Failure to comply with the distance for the
motor air intake
Presence of operators
contact with the machine
Use of loose clothing or untied long hair
IMPROPER USE LINKED TO METHODS OF USE
Failure to comply with the operating
conditions:
- Ambient temperature outside the limits
or incorrect
- Altitude above 1000 m
Failure to consider system and filter
pressure losses
Incorrect appraisal of the filter (for use with
suction in the place)
Operation exceeding the values given in
the "SPECIFICATIONS" and the electric
motor RATING DATA.
Rigid connection between the machine
and system
Using the unit with current
exceeding the motor rating
IMPROPER USE LINKED TO MAINTENANCE WORK
Failure to clean the filter
Failure to eliminate of layers of surface
dust
Failure to check the condition of parts
subject to wear (seals, flexible couplings,
etc.) where foreseen
FPZ-MI-R-MD-MOR-GOR-IE2-15-R03
CONSEQUENCES
Motor overheating and possible damage to
the blower
and possible Operator coming into contact with hot
parts of the machine
Possible catching or suction in the
machine or in the motor fan
Machine performance
values given in the "SPECIFICATIONS".
Possible motor failure and possible seizure
of the impeller
Particles entering the blower with seizing
of the impeller
Machine performance different from the
data given in the "SPECIFICATIONS".
Possible motor failure and possible seizure
of the impeller
Abnormal vibrations for the machine
and/or system with possible seizing of the
impeller.
values Possible overheating of the machine and
motor
Seizing of the impeller
Machine overheating
Machine performance different from the
data given.
RISKS
RISK FOR THE MACHINE
RISK FOR THE OPERATOR
RISK FOR THE OPERATOR
exceeding the RISK FOR THE MACHINE, SYSTEMS
AND OPERATORS
RISK FOR THE MACHINE
RISK FOR THE MACHINE, SYSTEMS
AND OPERATORS
RISK FOR THE MACHINE, SYSTEMS
AND OPERATORS
RISK FOR THE MACHINE
RISK FOR THE MACHINE
RISK FOR THE MACHINE, SYSTEMS
AND OPERATORS
RISK FOR THE MACHINE, SYSTEMS
AND OPERATORS
34 / 119