Changing The Batteries; Cleaning - Altech ALEC-42090 Mode D'emploi

8 Changing the batteries

The flashing code "short illumination in orange ( after green o r red reception sig-
nal)" indicates low batteries. At the same time, the symbol for low batteries is
dis-played in the IP app. Replace the batteries by two new ones of the type LR03/
Micro/AAA.
1. Take off the device from the installation bottom (see page 5, fig. 3).
2. Remove the batteries from the back side.
3. Insert two new batteries (type LR03/Micro/AAA) according to the marking.
4. Position the room control unit Analog onto the installation bottom and latch it in.
9 The room control unit performs a self-test for the duration of approximately 2
seconds.
9 This is followed by the initialisation.
9 After that, the test indication flashes (in orange and green).

9 Cleaning

Clean the device with a soft, clean, dry, and lint-free cloth. In order to remove heavy
contamination, moisten the cloth slightly with lukewarm water. Use a solvent-free
detergent for cleaning.
DK
NO
SE
FI
FR
GB
GB
95 95