Commissioning; Teach-In Of The Device; Teach-In To Altech V3 Ip Base Station - Altech ALEC-42090 Mode D'emploi

5

Commissioning

5.1

Teach-in of the device

In order be integrated into the Altech V3 IP System and to communicate with
other de-vices, the room control unit Analog must be taught-in first. The room
control unit Analog is taught-in directly to the Altech V3 IP base station, or in
conjunction with the radiator thermostats, to the Altech V3 IP Access Point. In
case of direct teach-in, the configuration is done on the device itself; in case of
teach-in via the Access Point, it is done via the IP app.
5.1.1

Teach-in to Altech V3 IP Base Station

For teach-in, keep a minimum distance of 50 cm between the devices.
The teach-in process can be interrupted by shortly pressing the teach-in key
again. This is confirmed by a short flash in red colour of the device LED.
If no teach-in is performed, the teach-in mode is finished automatically
after 30 seconds.
If the room control unit Analog shall be taught-in to the Altech V3 IP Base
station, the two devices to be linked must be set to teach-in mode.
DK
NO
SE
FI
FR
GB
GB
87 87