Function - Altech ALEC-42090 Mode D'emploi

• Only operate this device in a dry and dust-free environment.
• Do not expose the device to humidity, vibration, continuous sunlight or other
types of heat radiation, coldness, or mechanical loads.Ensure that children do
not play with this device or the packaging. Children must be monitored if nec-
essary.
3

Function

DK
NO
The Altech V3 IP room control unit Analog ALEC-42090 serves for setting the room
tem-perature according to individual requirements. The room control unit
SE
measures the temperature in the room and transmits these data cyclically to the
Altech V3 IP Base station ALEC-42010-xx or to connected Altech V3 IP radiator
FI
thermostats. The registered values allow an exact regulation of the room
temperature. The target temperature can be set manually with the setting wheel
FR
(E).
GB
GB
Communication with other components will be performed over the
Homematic (HmIP) radio protocol. The radio transmission is done on a non-
exclusive transmis-sion path; thus, disturbance cannot be completely excluded.
Disturbance impacts can be caused by switching processes, electric motors or
electric appliances. The range within buildings can differ strongly from the range outside (in
open air).
84 84