Safety; Intended Use; Safety Notes - Altech ALEC-42090 Mode D'emploi

2 Safety

2.1

Intended use

The room control unit Analog ALEC-42090 is a component of the Altech V3 IP
System and serves for
• the installation in residence-related environments,
• the registration of the actual temperature (room temperature),
• the setting of the target temperature (comfort temperature),
•
the control of the actual temperature by an activation of the Altech V3 IP Base
sta-tion for the control of floor heating systems (ALEC-42010-xx) or connected
Altech V3 IP radiator thermostats,
• a wireless communication in the Altech V3 IP network.
Every other use, modification and conversion is expressively forbidden. Improper
use leads to dangers the manufacturer cannot be held liable for, and to an exclu-
sion of warranty and liability.
2.2

Safety notes

All safety notes in these instructions must be observed in order to avoid accidents
with personal damage or property damage. No liability is assumed for personal and
material damage caused by improper handling or non-observance of the hazard
notes. Such cases render all warranty claims invalid. No liability is assumed for
consequential damage!
• Only use the device if it is in flawless state.
• Observe the performance limits of the device and its environmental conditions.
DK
NO
SE
FI
FR
GB
GB
83 83