Information Regarding Inaccurate Measurement Results - Powerfix Profi HG02404 Instructions D'utilisation Et Consignes De Sécurité

Do not use the product as a replace-
ment voltmeter.
Exercise caution with studs. These are
sharp and can cause injury.
Please note that inaccurate measure-
ment results can be obtained under
certain conditions. The following con-
ditions can cause inaccurate measure-
ment results:
– very thick walls
– weak battery
– deep-lying wires or pipes
– shielded AC wires
– thick walls with thin pipes or wires
– metal-clad walls
– very damp conditions
Using this product you cannot detect
wires in an electric circuit
– that are insulated from the mains
power supply.
– that have a direct current flowing
through them.
– that are used for computer or tele-
communication systems.
This product is only suitable for detect-
ing metal pipes. You cannot detect
10 GB/IE/NI
WARNING! Be careful
when pressing the stud buttons
, . The sharp needles
5 11
can cause injury (see Fig. E).
Information
regarding inaccurate
measurement results