Locating Wooden Objects - Powerfix Profi HG02404 Instructions D'utilisation Et Consignes De Sécurité

wall thickness. Continue to keep the
PUSH button
5. Move slowly along the wall with the
appliance. As the arrows in the display
move closer to the center of the display,
you are getting closer to the concealed
object. When the arrows touch and
a constant signal tone is heard, mark
this position (see Fig. D + I).
6. Now repeat the procedure, but this
time approach the object from the
other side. As soon as the signal tone
sounds, mark this position (see Fig. I).
The concealed object runs between
these two positions.
7. In the case of a search for a power
line, the voltage sign ( ) also appears
in addition to the intensity display.

Locating wooden objects

1. Proceed with the search for wood
objects as described in the section
"Locating concealed objects".
2. When the product has found an object,
mark it. To be sure that the object is
wood, slide the material switch
to METAL.
3. Now search in the same position for
metal. Should the product not find
anything, then the object is wood.
Should it find something, then the
object is metal. In this case, search
again at a different position in the
mode "STUD" and repeat steps 1
to 3.
22 GB/IE/NI
pressed down.
14
3