Contents Of Carton - Cub Cadet 19C70020 Série Manuel D'utilisation

Thank You
Thank you for purchasing a bagging attachment. It was carefully engineered to provide excellent performance when properly operated and maintained.
Please read this entire manual prior to operating the equipment. It instructs you how to safely and easily set up, operate and maintain your equipment. Please be sure that you, and any other
persons who will operate the machine, carefully follow the recommended safety practices at all times. Failure to do so could result in personal injury or property damage.
All information in this manual is relative to the most recent product information available at the time of printing. Review this manual frequently to familiarize yourself with the equipment,
its features and operation. Please be aware that this Operator's Manual may cover a range of product specifications for various models. Characteristics and features discussed and/or
illustrated in this manual may not be applicable to all models. We reserve the right to change product specifications, designs and equipment without notice and without incurring obligation.
If you have any problems or questions concerning this equipment, phone your local dealer or contact us directly. We want to ensure your complete satisfaction at all times.
Throughout this manual, all references to right and left side of the machine are observed from the operating position.
42"/46" Double Bagger
Before beginning installation, remove all parts from the carton to make sure everything is
present. Carton contents are listed and shown below. The hardware packs included in this kit
are detailed on this and the following page.
• Boot Assembly – 731-09329A
• Grass Bag Assembly (2) – 664-05104
• Vertical Bagger Support – 683-04519C
• Grass Bag Support – 683-04461C
• End Plugs (4) – 735-0246A
• Bagger Cover – 631-05031
• Upper Chute Assembly – 603-05204
• Upper Chute Support – 731-06497
• Hinge Pin – 711-04988
• Rear Attachment Bracket – 783-06168
• Left Hitch Side Bracket – 703-06854B
• Right Hitch Side Bracket – 703-09193
• Left Mounting Bracket – 703-09197
Carton Contents (42"/46" Double Bagger)

CONTENTS OF CARTON

• Right Mounting Bracket – 703-09193
• RZT Bagger Weight – 719-04271A
• Self-Adhesive Foam Strip – 721-04388
• Hardware Pack – 689-02200
• Hardware Pack – 689-02239A
• Bagger Boot Hardware Pack – 689-00636
50"/54" Double Bagger
Before beginning installation, remove all parts from the carton to make sure everything is
present. Carton contents are listed and shown below. The hardware packs included in this kit
are detailed on this and the following page.
• Boot Assembly – 631-09698
• Grass Bag Assembly (2) – 664-05104
• Vertical Bagger Support – 683-04519C
• Grass Bag Support – 683-04519C
• End Plugs (4) – 735-0246A
• Bagger Cover – 631-04292
• Chute Adapter – 731-10133
• Chute Extension Tube – 731-06611
• Upper Chute Tube – 631-05071
• Upper Chute Support – 731-06497
• Hose Clamp – 726-05019
• Bagger Screen – 731-06504
• Rubber Adhesive Strip (2) – 735-05020
Carton Contents (50"/54" Double Bagger)
These mounting brackets not
needed for this installation
Hardware
Pack
689-00341
4
• Flexible Hose Extension – 764-05023A
• Hex Head Screw (2) – 710-3013
• Cap Lock Nut (2) – 712-0442
• Hinge Pin – 711-04988
• Rear Attachment Bracket – 783-06168
• Left Hitch Side Bracket – 703-06854B
• Right Hitch Side Bracket – 703-06859B
• Left Mounting Bracket – 703-09197
• Right Mounting Bracket – 703-09193
• RZT Bagger Weight– 719-04271A
• Self-Adhesive Foam Strip (2) – 721-04388
• Hardware Pack – 689-02200
• Bagger Boot Hardware Pack – 689-02199