Important Notices; Warranty Information - Pentair MASTERTEMP 175K BTU/HR Guide D'installation Et D'utilisation

Section 2. Warning and Safety Instructions
Section 2: Warning and Safety Instructions
Congratulations on your purchase of the MasterTemp Pool and Spa Heater. Proper installation and service of your new
heating system and correct chemical maintenance of the water will ensure years of enjoyment. The MasterTemp heater
is a compact, lightweight, efficient, induced-draft, gas fired high performance pool and spa heater that can be directly
connected to schedule 40 PVC pipe. The MasterTemp heater also comes equipped with the Pentair multifunction
temperature controller which shows, at a glance, the proper functioning of the heater. All MasterTemp heaters are
designed with a direct ignition device, HSI (hot-surface ignition), which eliminates the need for a standing pilot. The
MasterTemp heater requires an external power source (120/240 VAC 60 Hz) to operate.
SPECIAL INSTRUCTIONS TO OWNER: Retain this manual for future reference. This instruction manual provides
operating instructions, installation and service information for the MasterTemp high performance heater. The information
in this manual applies to all MasterTemp heater models. READ AND REVIEW THIS MANUAL COMPLETELY,
it is very important that the owner/installer read and understand the section covering installation instructions, and recognize
the local and state codes before installing the MasterTemp heater. Its use will reduce service calls and chance of injury
and will lengthen product life. History and experience has shown that most heater damage is caused by improper installation
practices.

IMPORTANT NOTICES

For the installer and operator of the MasterTemp heater: The manufacturer's warranty may be void if, for any
reason, the heater is improperly installed and/or operated. Be sure to follow the instructions set forth in this manual. If you
need any more information, or if you have any questions regarding to this pool heater, please contact Pentair Water Pool
and Spa at (800) 831-7133.

WARRANTY INFORMATION

The MasterTemp pool and spa heater is sold with a limited factory warranty. Specific details are described on the
warranty registration card which is included with the product. Return the warranty registration card after filling in
the serial number from the rating plate inside the heater.
Pentair Water Pool and Spa high standards of excellence include a policy of continuous product improvement resulting
in your state-of-the-art heater. We reserve the right to make improvements which change the specifications of the heater
without incurring an obligation to update the current heater equipment.
These heaters are designed for the heating of chlorine, bromine or salt system swimming pools and spas or
in non-stationary installations, and should never be employed for use as space heating boilers or general
purpose water heaters. The manufacturer's warranty may be void if, for any reason, the heater is improperly
installed and/or operated. Be sure to follow the instructions set forth in this manual.
OPERATING THIS HEATER CONTINUOUSLY AT WATER TEMPERATURE BELOW 68° F. WILL CAUSE HARMFUL
CONDENSATION AND WILL DAMAGE THE HEATER AND VOID THE WARRANTY. Do not use the heater to protect
pools or spas from freezing if the final maintenance temperature desired is below 68° F., as this will cause condensation
related problems.
Rev. N 10/2018
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
MASTERTEMP
Pool and Spa Heater
CAUTION
®
MASTERTEMP Pool and Spa Heater Installation and User's Guide
5