Parts Overview - Bresser Temeo io Mode D'emploi

PARTS OVERVIEW

Main Unit (Fig. 2)
(1) Display – Temperature trend, indoor- and outdoor
temperature, as well as current time.
(3) MIN/MAX/+ button – Changes the value for one
setting. Allows switching between MIN and MAX
values. Press and hold for 2 seconds to initialize
receiving the RC signal from the remote sensor.
(3) SET button – Enter time and date setting mode.
(4) Battery compartment
(5) Table stand – Add if station is to be placed on a
flat surface.
Remote sensor (Fig. 3)
(6) Outdoor temperature
(7) Battery compartment
(8) Wall mount hole – This hole makes it possible to
mount the remote sensor on a wall.
(9) °C/°F button – This button selects between
Celsius (°C) and Fahrenheit (°F).
(10) Table stand – Foldable. Use this stand to place
the device on a flat surface
BEFORE YOU START
IMPORTANT!
1. Insert batteries for remote units before doing so for
the main unit.
2. Place the main unit as close as possible to the remote unit.
3. Position the remote unit and main unit within the
effective transmission range.
DE
GB
FR
IT
ES
17