Bresser Temeo io Mode D'emploi page 19

Low battery warning
When it is time to replace the batteries, the respective
low battery indicator
indoor temperature display (batteries for main unit) or
near to the outdoor temperature (batteries for remote
sensor).
USING TABLE STAND OR WALL MOUNTING
The main unit can be placed on a flat surface. The
remote unit also can be placed on a flat surface or
mounted on a wall using the recessed screw hole.
OPERATION
Receiving measurements and time signal
Once batteries are placed in the remote unit, it will start
transmitting temperature readings at roughly 45 second
intervals. As soon as batteries are installed in the main
unit it will start searching for a signal from the remote
sensor for about 3 minutes. Upon successful reception
of the signal, the outdoor temperature will be displayed
on the main unit. The main unit will automatically update
its readings at about 45 second intervals.
Temperature
1. Press the SET/°F/°C button to switch the displayed
temperature between °C and °F.
2. Once the battery is installed, the main unit will start
displaying the interior measurement information. The
main unit will display the information from the remote
sensor for the first time approximately 3 minutes after
the power supply was established.
will be shown next to the
DE
GB
FR
IT
ES
19