Bresser Temeo io Mode D'emploi page 20

Max/Min records of temperature and humidity
1. Press the MIN/MAX/+ button repeatedly to switch
between the current temperature and the values of
the MIN and MAX recordings.
2. In MIN/MAX temperature display mode, hold MIN/
MAX/+ button to reset all indoor and outdoor MIN/
MAX records to current values.
3. The MIN/MAX temperature values will be recorded
automatically.
4. The MIN/MAX temperature records automatically will
be reset at 0:00 o'clock (12:00 a.m.) every day.
Temperature trend
The temperature trend is calculated from the values of
different measurement periods and will be displayed as
follows:
Main unit signal receiving check
The transmission range is about 30 meters from the
remote station to the main unit (in open area). The
main unit should receive the temperature/humidity
information from the transmitter within 3 minutes after
set-up.
Should the main unit not receive information from
transmitter within 3 minutes after setting up, please
check following steps:
20
Rising
Steady
Falling