Service Information; Full Two-Year Home Use Warranty - Black & Decker BDECS200 Mode D'emploi

Scie circulaires 7-1/4” (184mm), 13 ampère
Masquer les pouces Voir aussi pour BDECS200:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Recommended accessories for use with your
tool are available from your local retailer.
WARNING:
The use of any accessory
not recommended for use with this tool
could be hazardous. Use only 7-1/4 "
(184mm) blades with 5/8" diameter arbor.

SERVICE INFORMATION

All BLACK+DECKER Service Centers
are staffed with trained personnel to
provide customers with efficient and
reliable power tool service. Whether you
need technical advice, repair, or genuine
factory replacement parts, contact the
BLACK+DECKER location nearest you.
To find your local service location, call:
1-800-544-6986 or visit
www.blackanddecker.com
FULL TWO-YEAR HOME USE
WARRANTY
Black & Decker (U.S.) Inc. warrants this
product for two years against any defects
in material or workmanship. The defective
product will be replaced or repaired at no
charge in either of two ways.
The first, which will result in exchanges
only, is to return the product to the
Problem
• Unit will not start.
For assistance with your product, visit our website www.blackanddecker.com for the location
of the service center nearest you or call the BLACK+DECKER help line at 1-800-544-6986.
TECHNICAL SPECIFICATIONS OF LASER:
Laser diode wavelength:
Laser Class:
Operating temperature:
Accuracy:
Imported by
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
TROUBLESHOOTING
Possible Cause
• Cord not plugged in.
• Circuit fuse is blown.
• Circuit breaker is tripped.
• Cord or switch is damaged.
633-670nm (red color)
IIIa
41°F (5°C) - 104° F (40°C)
+/- 1.8mm at every 300 mm
retailer from whom it was purchased
(provided that the store is a participating
retailer). Returns should be made within
the time period of the retailer's policy for
exchanges (usually 30 to 90 days after
the sale). Proof of purchase may be
required. Please check with the retailer
for their specific return policy regarding
returns that are beyond the time set for
exchanges.
The second option is to take or send the
product (prepaid) to a BLACK+DECKER
owned or authorized Service Center for
repair or replacement at our option. Proof
of purchase may be required.
This warranty does not apply to
accessories. This warranty gives you
specific legal rights and you may have
other rights which vary from state to state
or province to province. Should you have
any questions, contact the manager of
your nearest BLACK+DECKER Service
Center. This product is not intended for
commercial use.
Free Warning Label Replacement: If
your warning labels become illegible or
are missing, call 1-800-544-6986 for a
free replacement.
Possible Solution
• Plug tool into a working outlet.
• Replace circuit fuse. (If the
product repeatedly causes the
circuit fuse to blow, discontinue
use immediately and have it
serviced at a BLACK+DECKER
service center or authorized
servicer.)
• Reset circuit breaker. (If the
product repeatedly causes the
circuit breaker to trip,
discontinue use immediately
and have it serviced at a
BLACK+DECKER service center or
authorized servicer.)
• Have cord or switch replaced
at BLACK+DECKER Service
Center or Authorized Servicer
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bdecs300

Table des Matières