SilverCrest SKKIM 32 A1 Mode D'emploi page 11

BB58B%ERRN 6HLWH )UHLWDJ  6HSWHPEHU   
Inserting the headphones
1. Put on the headphones in such a way that the mark-
ing R is on the right and L is on the left.
2. Set the volume of the sound source. Make absolute-
ly sure that you are still able to hear the surrounding
sounds.
Attaching stickers
By using these stickers you give your headphones that
individual touch.
NOTE: the stickers|5 are intended for one-time attach-
ment to the loudspeakers.
1. Dirt can reduce the adhesive strength of the stickers.
Clean the adhesive surfaces in advance using a
suitable cleaning agent if required.
2. Remove a pair of stickers|5 from the backing paper.
3. Figure A: adhere one sticker|5 each to the outer
surface of the loudspeakers.
Changing earpads
Figure B: change the earpads|4, if necessary, in order
to individually adjust the headphones to your ears.
9
GB