Product overview
1
Auxiliary handle
2
On / Off switch
3
Spindle lock button
4
Angle clamping knob
5
Angle scale
6
Center marking
7
Rubber slip safety
8
On / Off indication
9
Main handle
10
Auxilary handle bolts
11
Base plate
12
Cutting depth setting screw
13
Height and angle stop
14
Height scale
15
Height clamping knob
16
Cutting depth adjuster
17
Dust extraction port
Intended Use
The tool is intended for sawing longitudinal
grooves for biscuit joints in solid wood and
woodlike materials. The tool is not intended
for commercial use.
Any other use or modification to the tool is
considered as improper use. The producer is
not responsible for any damage or injuries that
may result of it.
DUST COLLECTION
1
Attach the dust bag to the dust extrac-
tion port 17.
Make sure the dust bag is empty
and not clogged.
86
EN
Using the tool
1. Check the correct movement of the base
plate
11
before plugging in the power
cord.
2. Push the on / off switch
wait, until the tool has reached maximum
speed. Slowly push the tool forward into
the safely fixed workpiece.
3. Make sure the base plate
height and angle stop
evenly on the workpiece.
4. To switch off the tool, pull back the on /
off switch 2.
Joints
Longitudinal
Mitre
Frame
2
Alternatively you can directly attach a
suitable vacuum cleaner.
Never use the tool without a dust
collection system.
2
forward and
11
and/or the
13
always rests
Centre wall
Corner