Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1
2
3
5
6
7
8
1
120
EN
4
9
10
2
Product overview
1x
1
Chip extraction selector
2
Chip extraction port
3
Blade cover
4
Rebating depth guide
5
On / Off switch
6
Depth adjustment knob
7
Planing depth scale
8
Parallel guide
9
Lock off button
10
Power cord
1x
1x
Intended use
The tool is intended for planing and rebating
wooden materials, such as beams and boards.
It is also suitable for beveling edges. The tool
is not intended for commercial use.
Any other use or modification to the tool is
considered as improper use and could cause
considerable dangers.
DE
Lieferumfang
FR
Etendue de livraison
IT
Materiale compreso nella fornitura
NL
Leveringsomvang
SV
DUST COLLECTION
Leveransomfång
1
Attach a suitable vacuum cleaner to
CZ
the chip extraction
Rozsah dodávky
port 2
by use of the
adaptor provided.
SK
Rozsah dodávky
RO
Never use the tool without a dust
Volumul livrat
collection system.
GB
Scope of delivery
Using the tool
1x
1. To switch on the tool, press and hold the
lock off button 9. Then press and hold the
on / off switch 5.
2. Make sure your workpiece can not slip.
Start working, while holding the tool
firmly with both hands. Move the running
tool to the workpiece and push it forward
slowly while applying pressure on the
centre of the base plate.
3. To switch off the tool, release the on / off
1x
switch 5.
Warning! Apply the machine to the
workpiece only when switched on.
Otherwise there is danger of kickback
when the cutting tool jams in the work-
piece.
Planing
When planing hard materials (e.g. hardwood)
and utilizing wide planer width, set low plan-
ing depth and reduce feed. Excessive feed re-
duces the surface quality and can lead to rapid
clogging of the dust extraction port 2.
To achieve high grade surfaces, work with
sharp blades, low feed and low planing depth.
2
Alternatively lock the chip extraction
port with the chip extraction selector
by turning it as indicated.
EN
121
Publicité
Table des Matières
