Technical Data; Noise & Vibration; Dust Collection System - Pattfield Ergo Tools PE-860 FDF Traduction De La Notice Originale

Technical Data

Nominal voltage
Rated power
No-load speed (n )
0
Blade dimensions
Max. cutting depth
Angle adjustment
Height adjustment
Notch width
Weight
Protection Class
Sound pressure level (L
Sound power level (L
Max. vibration emission (a
The values given are valid for nominal voltages U of 230 V. For lower voltage and models for
specific countries, these values may vary.
Please observe the article number on the type plate of the tool. The trade names of the individual
tool may vary.
Noise & Vibration
The values given in these instructions have
been measured in accordance with a stand-
ardized measurement procedure specified in
EN 60745 and can be used to compare tools.
It may be used for a preliminary assessment
of exposure.
Warning! The vibration emission
during actual use can differ from the
declared total value depending on the use
of the tool.
88 EN
)
pA
)
WA
)
hw
230-240 V~ / 50 Hz
600 W
11000/min
ø 100 mm x ø 22 mm x 4 mm
18 mm
0° - 90°
5 - 35 mm
approx. 4 mm
2.9 kg
/ II
93.2 dB(A) / Uncertainty K = 3 dB(A)
104.2 dB(A) / Uncertainty K = 3 dB(A)
3.58 m/s / Uncertainty K = 1.5 m/s
2

Dust collection system

Use of dust collection can reduce dust-related
hazards.
To prevent personal injuries, make sure to
connect a suitable vacuum cleaner to the dust
extraction port 17 by means of the dust col-
lecting system adaptor.
2