Operating Remote Control - Napoleon Allure Vertical Serie Manuel D'installation

5.2

operating remote control

Power
Blue Flame
Orange Flame
Yellow Flame
Heater
Flame Speed
Top Light
Turns the appliance on/off.
Controls flame brightness.
Settings:
F0 - Flame off
F1 - Small flame
F2 - Medium flame
F3 - Bright flame
F4 - Brightest flame
Turns the heater and blower
on/off.
Settings:
H0 - Heater and blower off
bL - Blower on
H1 - Low heat
H2 - High heat
Controls the speed of the
flame. There are 5 flame speed
settings: 01 (slowest) 02, 03,
04, and 05 (fastest).
The top light colour rotation is
the same as the ember bed
colour rotation.
operating instructions
Ember Bed Color
Ember Bed
Brightness
Timer
Temperature
Control
Controls ember bed light
settings.
Settings:
L0 - Ember bed light off
L1 - White
L2 - Blue
L3 - Green
L4 - Red
L5 - Yellow
L6 - Purple
L7 - Auto-cycle through white,
blue, green, red, yellow, and
purple. (NOTE: It will take
8.5 seconds to switch
between colours.)
L8 - Lock to desired color
Controls the brightness of the
ember bed light.
Settings:
b1 - Low
b2 - Medium
b3 - Bright
b4 - Brightest
There are 10 timer settings:
00, 30min., 1h, 2h, 3h, 4h,
5h, 6h, 7h, 8h.
There are 7 temperature
settings: 61ºF [16ºC], 64ºF
[18ºC], 70ºF [21ºC], 75ºF
[24ºC], 81ºF [27ºC], 85ºF
[29ºC], and OFF.
21
W415-1830 / G / 07.20.20
EN