Napoleon Allure Vertical Serie Manuel D'installation page 12

installation
EN
7 1/2" (191.5mm)
3 7/16" (86mm)
Fig. 2: NEFVC32H Wall Mounting Installation
Template
5. Using the appropriate wall mounting installation template (Fig. 2 for NEFVC32H or Fig. 3 for NEFVC38H),
mark out the back and bottom bracket locations on the wall.
note:
The mounting brackets should be screwed into the wall studs with at least 4 screws. If the screws can-
not be screwed into a stud, ensure that plastic anchors (provided) are used to affix the brackets to the
wall and that the brackets are adequately secured.
6. Install the wall mount bracket (shipped inside the styrofoam piece protecting the top of the appliance) using 4
drywall anchors and 4 wood screws (supplied). Ensure the bracket is levelled.
note:
The hooks on the wall mount bracket must be facing upwards.
7. Install the bottom bracket using 2 drywall anchors and 2 wood screws (supplied).
8. Lift the appliance up until the two mounting slots clear the hooks on the wall mount bracket. Slide appliance
down until completely secured.
12
W415-1830 / G / 07.20.20
7 1/2"
(191.5mm)
3 7/16" (86mm)
Fig. 3: NEFVC38H Wall Mounting Installation
Template