Side Brush Replacement; Main Brush Replacement; Cleaning And Servicing The Filters - Dustbane Gladiator 464 Manuel D'opération

Side brush replacement

• Raise the front part of the machine.
• Press in the 2 tabs (indicated by the arrows) and pull off the brushes,
• Slide the new brush until it locks into place.

Main brush replacement

• Tilt the machine backwards until the handle is touching the ground and the main brush is easily reached.
• Manually turn the brush until a black button is seen on the right hand side of the brush core.
• Press the button and push to dis-engage the brush.
• Insert the new brush following the guide.

CLEANING AND SERVICING THE FILTERS

! INFORMATION: The filters are very important components of the machine and essential for correct operation. Proper filter maintenance
will allow you to obtain the best performance from your machine.
Pre-Filter
!INFORMATION: Clean daily.
• Remove the debris hopper to access the pre-filter.
• Release the two metal retaining clip arms that secure the pre-filter in place. Hinge the retaining clip arms outward and
remove the pre-filter.
• Shake the pre-filter into a debris receptacle.
• Replace the pre-filter and secure with retainer clips.
10
Operations Manual Gladiator 464/664