Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
23.
Slide the dump handle clip (33) over end of dump
tube (5) until it is in the location shown in figure 14.
noTe: Some adjustment to the dump handle clip position
may be needed in a later assembly step.
33
24.
Slide the handle grip (29) onto the end of the handle
tube (9) as shown in figure 15.
25.
Assemble the handle tube (9) to the dump tube (5)
and secure in place with a 1/4" x 1" curved head bolt
(26) and 1/4" nylock nut (24).
29
9
5
33
FIGure 14
5
26
24
FIGure 15
26.
Attach the dump tube to the upper hopper frame
using a U-clamp (34), 1/4" x 1-1/2" hex bolt (16) and
a 1/4" nylock nut (24).
27.
Snap the dump handle clip onto the pivot rod. See
figure 16.
28.
Slide the pivot rod into each of the pivot rod retainers
on the ends of the bag arm channels. See figure 17.
7
27
24
34
16
FIGure 16
FIGure 17
Publicité
Table des Matières
