Connecting The Monitor To A Power Source; Installation - Sharp LL-S201A Manuel D'installation

Connecting the monitor to a power source

Caution
• Use only the AC adapter and power cord supplied with the monitor.
1. Connect the monitor to the power outlet using the supplied AC adapter and power cord.
Back of monitor
2. Push the AC adapter core into the core restrainer
The monitor can be installed in three different ways.
Standing position
Place the monitor on the supplied stand.
Caution
• The stand is for use in landscape orientation. It cannot be
used for portrait orientation.
nAssembling the stand
1. Insert the back into the front.
Align the mark () on the front with the edge of the back
and insert the back from above.
Front
2. Slide the back across.
Slide the back until it clicks into place.
6
E
AC adapter
connection terminal
Core restrainer
AC adapter core

Installation

Back
Back
Front
Back
AC adapter (Supplied)
3. Attach the bottom cover.
Align the arrow on the bottom cover so that it points toward
the front, and press the projections on the bottom cover
into the pocket on the front and back.
Front
Front pocket
Projection
Arrow
For power
outlet
Power cord
(Supplied)
Back
Back pocket
Bottom cover