Connection Of Headphones (Commercially Available); Connecting The Monitor To A Power Source - Sharp LL-T15G4 Mode D'emploi

Connecting the monitor and turning the monitor on and off
Digital connection
- Use the separately-sold digital signal cable.
(model name: NL-C04J)
- The monitor has an input for connecting to a
computer with a DVI-compatible output
connector (DVI-D24 pin or DVI-I29 pin) and XGA
output capability. (Depending on the type of
computer to be connected, the display may not
work correctly.)
Digital signal cable
- Paying attention to connector direction, firmly
insert the signal cable vertically into the
connector, and then tighten the screws at both
sides.
Connect the accessory audio cable
When the accessory audio cable is connected to
the audio output terminal of the computer, the
sound of the connected computer is output from
the monitor speakers. You can also use the
headphone jack of the display.
DVI-D input terminal
Digital RGB output
terminal
Audio input terminal
Audio output terminal
Audio cable
Connection of headphones
(commercially available)
Headphones (commercially available) can be
connected.
Note:
- When the headphones are connected, no sound
can be heard from the monitor speakers.
Connecting the monitor to a power
source
Power terminal
12
Headphone
terminal
Headphones
AC outlet
Power cord