Safety Regulations; Description Of The Appliance - Domo DO190A Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

DO190A
DELIVERY AND UNPACKING :
When you take out the unit from the box, please check carefully if there isn't any
damage caused by transport. If this is the case, please contact your dealer immediately.
Every appliance has been thoroughly check when it left the factory.
IMPORTANT : After unpacking, you need to leaf the appliance upright and not in use.
When you don't follow this procedure, you risk of damaging the unit.
When you don't want the hot air to enter the room, you need to guide the hose outside.

SAFETY REGULATIONS :

This appliance has been designed for a use with 220V-240V. Don't use a extension
cord of any kind..
Always turn off the appliance and remove the plug from the socket before doing any
maintenance.
Don't every place the appliance horizontaly. This can damage the compressor. Only
use the appliance upright on a fl at surfacePlaats het toestel nooit horizontaal. Dit kan
de compressor beschadigen.
When you turn off the appliance, leaf it off for 3 to 4 minutes before you turn it on
again.
Always let your appliance be repaired by an autorised dealer.
The compressor has a delay time of 3 minutes after you turn off the appliance.

DESCRIPTION OF THE APPLIANCE :

1. Control panel
2. Upper airoutlet
3. Handle
4. Weels
5. Air inlet.
6. drainage
7. Cord
8. Bend plastic connector
9. Air exhaust connector
10. Air exhaust duct

Publicité

Table des Matières
loading

Table des Matières