Lcd Display - Domo DO190A Mode D'emploi

DO190A
LCD- DISPLAY
1. Temperature setting.
2. Auto mode
3. Cool mode
4.Ventilation mode
5. Ventilation speed
6. Deshumidifi cation mode
7. Timer
8. Error code
CONTROL PANEL :
1. Temperature switches
2. Ventilation speed button
3. Mode button
4. Timer knob
5. On/off switch
OPERATION OF THE CONTROL PANEL:
On/off switch :
For turning on and off of the unit.
Mode button :
There are 4 different modes from which you can choose : Auto - Cooling -
dehumidify - Ventilation
Ventilation speed button :
You can choose three different speeds : slow, medium or high.
Temperature button :
As soon as you turn on the airco a temperature will be displayed (this is mostely
different from the room temperature). Use the arrows on the temperature button to
lower or raise the temperature. The temperature can vary from 15°C upto 31°C.
For best use of your airco, fi rst determine the temperature and afterwards select the
mode. This prevents unnecessairy strain on different parts of the airco.
Timer button :
Press the timer button. Use the arrows on the timer button to programm the
airconditioner. When the appliance is on, you can programm it to turn it off. When the
appliance is off, you can programm it to turn on. (remember to put the on/off button in
the on position when you programm the airco to turn on.)
The maximum programmable time is 12 hours.